An aluminium oxide (99%) with fine particles (average size 0.2 microns) for an excellent surface Polish. Suitable for use with IOL’s, RGP and Soft lenses.
A surface polish formulated to meet the requirements of all high performance fluorocarbon materials. High refined particle size to ensure a fine abrasive polishing action to leave an exceptional surface finish (RGP only).
A surface polish formulated to meet the requirements of all high performance fluorocarbon materials. High refined particle size to ensure a fine abrasive polishing action to leave an exceptional surface finish (RGP only).
A product specifically formulated to polish Fluorocarbon/Silicone/Acrylate, CAB and PMMA materials to a particularly high surface finish whilst protecting the properties of wettability and permeability of finished lenses. The polish will stay in suspension without settling or aggregation of the abrasive particles. Contains a coolant which enables lenses to be polished at high cutting rates without any heat build-up. Suitable for use with microcloth, sponge, pellon, pitch, wax, velveteen, silk or polypads.
A product specifically formulated to polish Fluorocarbon/Silicone/Acrylate, CAB and PMMA materials to a particularly high surface finish whilst protecting the properties of wettability and permeability of finished lenses. The polish will stay in suspension without settling or aggregation of the abrasive particles. Contains a coolant which enables lenses to be polished at high cutting rates without any heat build-up. Suitable for use with microcloth, sponge, pellon, pitch, wax, velveteen, silk or polypads.
A natural development from the well established GP1. This polish gives particularly rapid polishing which is useful for edge and peripheral curving. Due to the high polishing rate, care should be exercised by the technician until familiar with the product.
A natural development from the well established GP1. This polish gives particularly rapid polishing which is useful for edge and peripheral curving. Due to the high polishing rate, care should be exercised by the technician until familiar with the product.
A surface polish for all RGP materials specially formulated to create a lustrous surface which protect the wet ability of the material.
Silo2 Care is designed to polish Fluorocarbon/Silicone/Acrylate, CAB and PMMA materials to a lustrous surface while protecting the properties of wettability and gas permeability of the product. The slurry is designed to stay in suspension without “clumping” and yet the suspended vehicle will not attack the properties of the material to which it is applied. Silo2 Care is fast acting yet gentle while cooling the surface on which it is used.
A rapid edge polish suspended in a non-aqueous carrier. This product may be used with any type of soft lens material.
A rapid edge polish suspended in a non-aqueous carrier. This product may be used with any type of soft lens material.
A high performance soft lens polish specially formulated to offer a very high quality smooth surface finish on any water content material.
A high performance soft lens polish specially formulated to offer a very high quality smooth surface finish on any water content material.
An oil based polish suitable for all soft lens materials.
A water based polish suitable for all hard lens materials.
Extremely high quality aluminium oxide polishing powder. Average particle size distribution of 55% under 1 micron, 95% under 3 microns and 100% under 5 microns. Suitable for use with RGP and Soft lenses.